TRACE 200 

By stepping up to the Trace 200 Model line of analyzers you get either a Class I Divsion II or Class I Division I rating. You also have the option of upgrading the standard galvanized steel conduits  to corrosion proof stainless steel conduits.

CORROSION PROOFING 

Using stainless steel instead of galvanized steel in the construction of the wiring conduits will reduce the risk of corrosion of the instrument; all of the conduits in the analyzer are replaced with their stainless steel counterparts. 

DIAGNOSTIC ALARM 

The alarm provides contact output to alert operations in the event of one of the following fault conditions: 

1. Out of tape 
2. Motor failure 
3. Optical system failure 
4. Auto Calibration failure 

SMARTALK 

SMARTalk provides complete remote operation via personal computer or host with true bidirectional communication. The operator does not have to travel to the measurement site to alter operation, initiate calibration, or view data. Controls, reports, and data are available at lab or office via a personal computer link. Remote access reduces the chance of "no fault found" service calls where on site trips find no fault with the equipment. 

LCD GRAPH DISPLAY 

The display is a paperless chart recording of the concentration with selectable time scale to make comparisons and graphically display operating trends over time. 

CABINET HEATER 

A heater with thermostat control is integrated into the cabinet which provides freeze protection throughout the cold winter months. This will prevent the humidifier solution from freezing in sub zero temperatures causing the unit to malfunction. This will drop the lowest allowable operating temperature 15°C to -10°C. 

VAPORIZING REGULATOR 

The vaporizing regulators vaporize a liquid into a gas then perform a single stage pressure reduction on the gas. Pressure drops through pressure regulators may cause cooling which allows liquid to form. The vaporizing regulator puts heat back into the flow media to insure that is stays a gas. 

CHART RECORDERS 

A hard copy record of 4-20mA output is available in: 

• General Purpose / Division II 
• Division I 

AUTO CALIBRATION 

The auto calibration provides software algorithm, contact outputs, solenoid valves, tubing, and customer connections for automatically calibrating analyzer at pre-selected time intervals. 

REMOTE DISPLAY AND ALARM 

This option uses the 4-20 output from the analyzer to generate a digital display of concentration and adjustable alarm contact outputs

CAL TAP

The calibration tap point includes the connection fittings and tubing together with a three-way ball valve to easily connect calibration gas to the analyzer.

BACK-LIT DISPLAY
A new option available on the TRACE analyzer is a light behind the LCD to make operation even more user friendly.

DISPLAY  Alpha Numeric LCD  128 x 64 pixel  TEMPERATURE RANGES  -10°C to 50°C (operating)  0°C to 70°C (storage)  ANALOG - Isolated 4-20mA  ANALYTICAL PERFORMANCE  Resolution: 1 ppb  Accuracy: ±2%  Repeatability: ±1%  Linearity:±1%  Drift: Nil  Temp. Coefficient: 0.01% / °C  Analysis Time: 0.75 Second  Detection Ranges:  0-1 ppm    0-50 ppm    0-500 ppm  AREA CLASSIFICATION  Division II  Division I  WEIGHT - Approx. 50 lbs; 22.7 kg  DIMENSIONS - 16" X 18" X 10"  POWER REQUIRED  110VAC, 60 Hz or  220VAC, 50 Hz or  12VDC, or  24VDC  ADDITIONAL FEATURES  (compared to the previous model)  Explosion Proof Housings  OPTIONAL FEATURES  (features not optional on previous model are bold)  Diagnostic Alarm  SMARTalk  LCD Graph Display  Auto Calibration  Cabinet Heater  Vaporizing Regulator  Chart Recorders  Cabinet Stand  Remote Display and Alarms  TRACErase  Solar Power  Multi Stream  Sample Filter Back-Lit Display Corrosion Proofing

CABINET STAND 

The cabinet stand is a pipe stand with mounting holes for outdoor and indoor use. 

TRACERASE 

TRACErase uses technology based on a catalytic combustion process to oxidize vented samples thus preventing fugitive emissions from entering the atmosphere without causing back pressure on the analyser. Packaged to provide explosion proof protection, this unit may be used in hazardous locations. 

SOLAR POWER 

This option includes batteries, a solar panel, and charge control to maintain analyzer operation in remote locations 

MULTI-STREAM 

This option allows the analyzer to select and analyze more than one sample source. This is ideal for any situation where more than one sample source is present.